• 2.71 m-4.04 m work widths
• Push-type or Pull-type cutterbar
• Available with or without conditioner
• Compact M models
• Models with powered top hats

The EasyCut F model range is a line-up of innovative front mowers with or without tine or roller conditioner and work widths of 2.71 m to 4.04 m. At the same time, the range comprises particularly compact and light-weight front mowers for mountain fields and applications. Top hats are available for some models. These form narrow swaths that the tractor can straddle.

These front mowers offer work widths of 2.71 m to 3.16 m and have powered top hats that form narrow swaths so the tractor can straddle them. The focus is on quality forage.

The EasyCut M front mowers are our lightweight machines designed for operation on steep slopes and for spreading material across the work width. Mounted close to the tractor without A-frame and benefitting from a low centre of gravity, the machines give perfect contouring.

• Ideally suited for compact tractors and mountain regions
• Lightweight machines reduce the load on the front axle
• Compact design for good handling
• Centre-of-gravity suspension and pivoting headstock

The front-mounted 2.73 m EasyCut F 280 M, the 3.16 m F 320 M, and the 3.60 m F 360 M disc mowers are the ideal mowers for mountain fields, boasting a compact design, a centre of gravity close to the tractor, a perfect cut on steep slopes and good attachment options for light-weight and compact mountain tractors.

Following every contour, the pushing suspension design provides generous vertical travel and combines with long skids and a telescoping top link to provide optimum ground hugging in any direction. The extremely small gap between the tractor wheels and the mower reduces the pivoting range, increases drive shaft longevity and enhances visibility.

30 cm vertical travel on either end of the machine allows EasyCut F 280, F 320 M and F 360 M to give clean cuts in undulating terrain while protecting the sward.

The front mowers EasyCut F 280 M, F 320 M and F 360 M are not suspended in their mid-point but in their centre of gravity – a design that distributes the pressure uniformly across the entire work width and leads to cleanest cuts.

The guard ends on EasyCut F 280 M and F 320 M front fold back to bring the transport width down to 3.00 m. They can also fold hydraulically as an option. EasyCut 360 M has transport width of 3.45 m.

• Work width: 3.16 m
• PUSH-type or PULL-type cutterbar
• Choose between aggressive steel tines or chevron-profiled rollers for intensive treatment

The front mowers F 320 CV with tine conditioner and F 320 CR with roller conditioner are specialists that warrant high-quality forage. Featuring either a large 64 cm diameter tined rotor or two 25 cm conditioning rollers, these mowers are the pros that deliver high-quality forage and best conditioning even in high-yielding crops.

With no A-frame required, there is plenty of space around the headstock. The pushed design makes for a very compact machine, reduces weight and is gentler on the turf. The transverse pivoting action is provided by the tractor’s link arms. The pulled version has the suspension springs integrated in the machine’s suspension system. The tension of the two springs is controlled from one single crank.

The pulled headstock design allows the machine to break back and up through a larger angle, hence making it more suitable for operation in rolling land.

The pulled headstock has a hydraulic cylinder that raises the mower extra high, providing plenty of ground clearance in any type of terrain. This means there is plenty of clearance for butterfly combinations to handle high-volume swaths on the headland.

Each end of the guard can be folded back to bring transport width down to 3 m. This can also be done hydraulically from the tractor as an option.

• 3.60 m work width, 3.45 m transport width„
• Choose between aggressive steel tines or chevron-profiled rollers for intensive treatment
• Pushed or pulled design

The KRONE EasyCut F 360 CV and CR front mowers can have a pushed or pulled cutterbar. Working at a width of 3.60 m, the machine suits wide tractors with oversize tyres. More generous overlaps within the combination result in clean cuts on slopes and in curves and make for larger work widths in general.

The KRONE EasyCut F 360 CV and CR front mowers can have a pull-type suspension. This allows the mower to break back and up for added protection from foreign objects.

The floating EasyCut F 360 CV and F 360 CR in pulled configuration are compact and slim machines that provide excellent visibility. These machines impress by a low dead weight and cleanest cuts.

Adjustable springs optimize the ground pressure and allow the machine to float. A telescoping top link is available to deliver perfect cuts in undulating terrain.

• The first foldable cutterbar on the market
• 4.04 m working width and yet less than 3 m transport width
• Maximum overlap and high efficiency
• Hydraulic suspension is as a standard feature
• Hydraulic slewing gearbox
• Intensive conditioning from aggressive steel tines

This first foldable cutterbar on the market is awarded the DLG Silver Medal at Agritechnica 2019. The KRONE development translates into maximum efficiency, maximum overlaps and maximum road safety. From a fingertip control, the operator activates a hydraulic slewing gearbox and swings the ends in front of the cutterbar without disconnecting the driveline.

Coupling directly to the tractor link arms, the new and push-type KRONE headstock does without an A-frame. The hydraulic suspension is integrated in the lifting mechanism so that only one single-acting and one double-acting spool are required. The end guards and the foldable swathing drums are sequence controlled from the convenience of the cab.

To prepare the machine for road travel, the two swathing drums on either side swing behind the tractor wheels. This does not cut the driveline and the discs remain in cutting position. The slewing gearbox which provides the connection is powered and secured hydraulically – all done automatically from the cab. The design translates into a less than 3 m transport width.