Zincsprey L228 – með flögum

• Highly effective thin layer of zinc
• Ideal for subsoil structures or as a stable surface
• Long-term corrosion protection with additional barrier protection due to zinc flakes

  and nano particles

• Ideal as excellent metal primer for original manufacture and repair of damaged zinc phosphate layers
• Quick-drying, can be spot-welded and levelled over, good functionality in conjunction with PU and MS polymer sealants, can be over-painted using commercial 1K and 2K topcoat systems (prior compatibility testing recommended )
• Temperature resistant up to +240°C
• Drying:

  – bone-dry: approx. 15 min

  – grip-dry: approx. 30 min

  – completely dry: approx. 10 – 12 hrs

  – may be painted on after approx. 12 hrs

Application: 

• The parts being treated must be clean, dry, grease and rust-free
• Shake the can for at least 2 minutes before opening
• Spray thinly from a distance of approx. 15 – 20 cm (1 spray = approx. 20 µm). There should be a second spray For metals with greater surface roughness
• Allow to dry for approx. 5 min when sprayed several times

Advantages of zinc flakes:

• Contact, conductivity and the cathodic corrosion protection remain even when the zinc flakes are being moved as the pigments lie closely on top of one another, improved ability to weld
• Better resistance against environmental influences due to the long diffusion paths, the penetration of water and moisture is made considerably more difficult as the flakes have a great hydrophobic (water-repellent ) surface
• Surface of the layer is smoother and stronger, better grip and better layer strength